The STARTRC 4-in-1 Dynamic Light Accessory for DJI Air 3 / Air 3S was built to enhance, integrate, and perform. The component-friendly custom-engineered design is tailored to align with your DJI Air 3 / Air 3S’s structure perfectly. The clever design avoids blocking downward obstacle sensors, built-in fill lights, or cooling vents (critical for flight safety and performance), preserves full flight capabilities and sensor accuracy, and works with the drone’s native payload system as a plug-and-play upgrade—no modifications needed

Equipped with 4-in-1 dynamic light modes (Full Brightness for night footage, 25% Low Light for cinematic shots, Strobe Mode for visibility, SOS Emergency for emergencies) and seamless drone integration, aerial photographers, search & rescue teams, creative content creators, and drone pilots trust STARTRC to boost their DJI Air 3 / Air 3S’s functionality. Protect your investment.

The STARTRC IP67 Waterproof Hard Case for DJI Air 3/Air 3S Fly More Combo was built to organize, protect, and carry. The precision-engineered interior is tailored exclusively for the DJI Air 3/Air 3S drone, RC 2/RC-N2 controller, and all Fly More Combo accessories, including the battery charging hub and 65W charger. The clever design holds the Air 3/Air 3S drone with gimbal protector installed, up to 4 spare Intelligent Flight Batteries (plus 1 installed on the drone), charging hub, filter sets, propellers, RC cables, and small accessories securely, ensuring a snug fit for professional shoots or outdoor adventures.

All accessories securely—tested in rugged environments like Yosemite and Yellowstone by professional aerial filmmakers for real-world durability

Equipped with a high-strength ABS resin shell and shock-absorbing EVA foam, drone pilots, adventure enthusiasts, and commercial operators trust STARTRC to safeguard their Air 3/Air 3S setup. The IP67 waterproof rating (submersible up to 1m for 30 minutes), pressure-equalizing valve, and 100+ lbs compression resistance ensure reliable protection even in extreme conditions. The polished bottom and anti-vibration padding further shield gear from abrasion and impacts during transport. Protect your investment.

The STARTRC Multi-Compatible Drone Storage Case was built to store, fit, and carry. The precision-engineered design fits a full range of DJI drones—including Mini 4 Pro, Mini 3 Pro, Mavic 3, Mavic 2, Air 2, Air 2S, Mini, Mini 2, and Mini SE. The clever design also accommodates essential drone accessories (batteries, controllers, propellers, filters) alongside the main unit, enabling all-in-one storage that eliminates clutter.

Equipped with wide DJI drone compatibility (covers popular Mini/Mavic/Air series models) and large, space-efficient capacity (roomy interior for drones + accessories, slim enough to slide into backpacks/totes/luggage), daily drone pilots, travel creators, and casual flyers trust STARTRC to keep their gear organized for daily carry or short trips. Protect your investment.

The STARTRC All-in-One Protector for DJI Air 3S/Air 3 was built to protect, secure, and preserve. The precision-molded design is exclusively tailored to fit your DJI Air 3S/Air 3 Fly More Combo perfectly, matching the drone’s folded structure. The clever design shields propellers from crushing, bending, and dust, supports the fuselage to reduce vibration and wear, and comprehensively defends the gimbal and downward sensors from debris and pressure—keeping your gear intact.

Equipped with an upgraded dual-layer defense system (full-enclosure propeller armor for blade protection, integral fuselage support base for shock relief) and extreme durability (withstands 30+ lbs of pressure without deforming), aerial photographers, travel drone pilots, and outdoor enthusiasts trust STARTRC to safeguard their DJI Air 3S/Air 3 during transport and rough use. Protect your investment.

The STARTRC 20mm Ground Clearance Landing Gear for DJI Air 3S was built to protect, elevate, and endure. The precision-engineered design is tailored to fit your DJI Air 3S perfectly. The clever design elevates the drone by 0.79" (20mm), creating a protective buffer between critical components (sensors, motors, gimbal) and ground debris—ideal for beaches, gravel paths, or grassy fields—while preventing abrasive particles from damaging delicate parts to extend the drone’s lifespan.

Equipped with an ultralight aviation design (25g/0.88oz, lighter than an AA battery) and durable high-strength ABS material, plus a 20mm ground clearance system, outdoor drone pilots, travel photographers, and adventure creators trust STARTRC to safeguard their DJI Air 3S without compromising its 46-minute flight time or agile maneuverability. Protect your investment.

The STARTRC All-in-One Protector for DJI Air 3S/Air 3 was built to protect, secure, and preserve. The precision-molded design is exclusively tailored to fit your DJI Air 3S/Air 3 Fly More Combo perfectly, matching the drone’s folded propeller and fuselage structure. The clever design shields propellers from crushing, bending, and dust (critical for flight balance) and supports the fuselage to reduce vibration and wear—preserving the $1,000+ drone’s stability and aesthetic integrity during transport and storage.

Equipped with an upgraded dual-layer defense system (full-enclosure propeller armor for impact/drop protection, integral fuselage support base for shock relief and sensor guard) and extreme durability (withstands 30+ lbs of pressure without deforming), aerial photographers, travel drone pilots, and gear enthusiasts trust STARTRC to safeguard their DJI Air 3S/Air 3 from rough handling and stacking damage. Protect your investment.

The DJI Air 3 Pro-Grade Ultralight Filter Set was built to fit precisely, control exposure, and elevate aerial creativity. Custom-engineered exclusively for DJI Air 3, it ensures precise compatibility and optimal performance. This professional-grade optic solution controls exposure in any lighting—preventing overexposure for crisp, vibrant footage in bright conditions—and enables cinematic effects like long exposures and smooth motion blur (e.g., flowing water, moving clouds), taking aerial content to professional levels.

Equipped with a GimbalSafe Ultralight Design, it features aircraft-grade aluminum frames totaling only 0.8oz—ultra-lightweight to avoid straining the drone’s gimbal. Rigorously tested to ensure zero impact on gimbal stability, balance, or flight performance, it’s safe for extended flights and complex maneuvers without disrupting agility. Aerial videographers, landscape photographers, content creators, and drone enthusiasts trust this set for its optical precision and flight-friendly build. Unlock pro-level aerial shots with confidence.​

The STARTRC Night Flight Light Accessory for DJI Drones was built to enhance, create, and shine. The versatile design is tailored to transform ordinary night flights into eye-catching aerial displays for your drone. The clever design offers creative versatility—perfect for nighttime photography, wedding shoots, outdoor events, or viral content—and enables artistic long-exposure shots that capture 3 glowing halo rings in motion, ideal for surreal cinematic aerial art.

Equipped with 3 dynamic light modes (Solid Glow for low-light visibility, Pulse Mode for event attention, Strobe Mode for dramatic footage/emergencies) and one-tap switching convenience, nighttime aerial photographers, event creators, content makers, and drone enthusiasts trust STARTRC to elevate their DJI drone’s night flight capabilities. Elevate your night shots.